With detailed tuning instructions and practical tips for configuring your receiver, even small reception problems can be addressed swiftly, ensuring consistent, high-quality broadcasts every time.
Understanding key technical parameters, such as symbol rates, polarization, and orbital positions, allows for accurate tuning and optimal reception.
Step-by-step setup instructions create installation straightforward for both beginners and experienced users, while minimizing mistakes.
Regularly tracking channel updates and newly launched broadcasts keeps your receiver synchronized with all current frequencies.
Troubleshooting guidance provides quick solutions for common problems like weak signals, interference, or temporary disruptions.
Proper maintenance of your dish and receiver helps maintain stable signals, reducing the chances of interruptions during viewing.
Organizing frequency information and setup procedures makes managing your receiver easier, without wasting time searching for scattered data.
Following these detailed practices ensures smooth, consistent, and high-quality viewing across multiple satellites.
With all these factors combined, enjoying your favorite channels becomes simple, reliable, and stress-free.
In this article, we provide all the essential frequency information for the featured channel and guide you through the correct steps to install it on your receiver.
We’ve also included practical troubleshooting advice to help you resolve any reception issues and maintain smooth, uninterrupted viewing.
This article provides the newest frequency updates for the highlighted channel across all major satellites, along with clear, step-by-step guidance for setting up your receiver.
It also outlines practical troubleshooting tips to resolve common problems like low signal strength or dish misalignment.
By following these instructions, you can enjoy stable broadcasts and a seamless satellite viewing experience every time.
Following clear, step-by-step instructions for setting up and configuring your receiver helps ensure channels are tuned accurately and signal quality stays strong, even for newly added or updated broadcasts.
Troubleshooting advice helps resolve common reception issues, such as weak signals or temporary interruptions, without requiring technical expertise.
By combining accurate data, practical installation tips, and problem-solving strategies, you can enjoy a smooth, seamless viewing experience across all satellites.
Algérie 3, also known as A3 or the Third Channel, is a prominent Algerian television channel under the Établissement Public de Télévision (EPTV).
Launched on July 5, 2001, and managed by Abdel Rahman Khalas, A3 is renowned for its diverse programming, focusing on news, sports, politics, and cultural content.
As a government-backed, free-to-air channel, it delivers high-quality broadcasts in Arabic, covering Algerian and Arab world events.
Popular for its sports coverage, including Algerian national team matches, and political talk shows, Algérie 3 engages viewers in Algeria and beyond.
This guide provides the latest frequencies for Algérie 3 on satellites as of June 2025, a step-by-step receiver setup, reception tips, and highlights of its compelling programs, ensuring seamless access to this dynamic channel.
Why Watch Algérie 3?
Algérie 3 is a go-to channel for Algerians seeking in-depth news, live sports, and cultural insights. Its political programs, like Fi Dairat Ad-Daw, tackle pressing issues, while sports broadcasts, including African Cup of Nations matches, captivate football fans.
The channel also offers dramas, economic discussions, and historical documentaries, reflecting Algerian life and heritage.
Free-to-air and broadcast in HD, Algérie 3 uses advanced technology for clear visuals and sound. With live streaming on www.entv.dz and social media presence on YouTube and Facebook, it connects with local and diaspora audiences, making it a vital part of Algerian media.
Algérie 3 Satellite Frequencies
To tune into Algérie 3, you need accurate frequency, polarization, symbol rate, and FEC (Forward Error Correction) settings for your satellite receiver.
The table below lists the latest frequencies for Algérie 3 on key satellites as of June 2025, sourced from reliable platforms like www.entv.dz, www.lyngsat.com, and www.tda.dz.
As a free-to-air channel, no subscription is required. Always verify frequencies with these sources, as transponder settings may change.
|
Satellite |
Frequency |
Polarization |
Transmission Rate |
FEC |
Coverage |
Details |
|---|---|---|---|---|---|---|
|
Nilesat 201/Eutelsat 7 West A (7.0° W) |
11680 MHz |
Horizontal (H) |
27500 kS/s |
3/4 |
Middle East, North Africa |
SD/HD, DVB-S2, strong signal in Algeria, Tunisia, Morocco. |
|
Hot Bird 13E (13.0° E) |
12577 MHz |
Horizontal (H) |
27500 kS/s |
3/4 |
Europe, parts of North Africa |
HD, DVB-S2, ideal for Algerian diaspora in France, Italy. |
|
Astra 1L (19.2° E) |
12552 MHz |
Vertical (V) |
22000 kS/s |
5/6 |
Europe |
SD, suitable for viewers in France, Germany, Spain. |
|
AlcomSat-1 (24.8° W) |
12160 MHz |
Horizontal (H) |
30000 kS/s |
2/3 |
North Africa, parts of Europe |
HD, DVB-S2, excellent via Algeria’s national satellite in Algiers, Oran. |
Important Notes
-
Satellite Availability: Algérie 3 is broadcast on Nilesat, Hot Bird, Astra, and AlcomSat-1. No confirmed frequencies are available for Arabsat Badr (26.0° East), Yahsat (52.5° East), or Es’hailSat (25.5° East) as of June 2025.
-
Frequency Accuracy: Avoid outdated frequencies like 10921 MHz (Vertical) on Nilesat or 11059 MHz (Horizontal) on Eutelsat 5 West A, which are no longer active for Algérie 3. The table above provides the most reliable settings.
-
Global Access: Signals may weaken outside MENA and Europe, such as in Asia or the Americas. Stream live on www.entv.dz or YouTube for worldwide access.
-
Free-to-Air Status: Algérie 3 is unencrypted, requiring no smartcard, ensuring accessibility within satellite footprints.
Tips for Optimal Reception
To enjoy Algérie 3’s broadcasts in high quality, follow these practical reception tips:
-
Dish Size: Use a 60-80 cm dish for Nilesat and Hot Bird in MENA and Europe (e.g., Algiers, Paris). For AlcomSat-1, a 70-90 cm dish is ideal. In fringe regions (e.g., northern Europe for Nilesat), a 90-120 cm dish improves signal strength.
-
Dish Alignment: Align your dish to Nilesat (7.0° W), Hot Bird (13.0° E), Astra (19.2° E), or AlcomSat-1 (24.8° W) using a satellite finder or app like SatFinder or DishPointer. Ensure a clear line of sight.
-
LNB Selection: Install a Universal Ku-band LNB with 9.75 GHz (low band) and 10.6 GHz (high band) frequencies. Ensure DVB-S2 compatibility for HD broadcasts on Hot Bird and AlcomSat-1.
-
Signal Strength: Target 70% or higher signal quality (98% is optimal) on your receiver’s signal meter to prevent pixelation. Adjust LNB skew for best performance.
-
Weather Protection: Ku-band signals may weaken during heavy rain. Secure your dish and check LNB caps for water damage to ensure consistent reception.
-
Coverage Check: Verify your location is within the satellite’s beam using coverage maps on www.dishpointer.com or www.satbeams.com.
Setting Up Algérie 3 on Your Receiver
Adding Algérie 3 to your satellite receiver is straightforward with these steps, compatible with most receivers (e.g., Strong, Humax, Technisat), though menu names may vary slightly.
-
Enter the Menu:
-
Press “Menu” or “Settings” on your remote.
-
Navigate to “Installation,” “Channel Search,” or “Antenna Setup.”
-
-
Select Manual Scan:
-
Choose “Manual Scan,” “Manual Installation,” or “Add Signal Carrier.”
-
Select “Add TP” or “Edit Signal Carrier” if prompted.
-
-
Choose the Satellite:
-
Select Nilesat (7.0° W), Hot Bird 13E (13.0° E), Astra 1L (19.2° E), or AlcomSat-1 (24.8° W) from the satellite list.
-
If not listed, manually enter the orbital position.
-
-
Input Signal Carrier Settings:
-
Refer to the frequency table above and enter the settings for your chosen satellite (e.g., 11680 MHz, Horizontal, 27500 kS/s, 3/4 for Nilesat).
-
Confirm all values are correct.
-
-
Run the Scan:
-
Press “Scan,” “Search,” or “OK” to begin the scan.
-
Select “FTA Only” or “All Channels” to include free-to-air channels.
-
Wait 1-3 minutes for the scan to complete.
-
-
Save Channels:
-
Press “Save” or “OK” to store the scanned channels.
-
Algérie 3 will appear as “A3,” “A3 HD,” or “Algérie 3” in your channel list.
-
-
Adjust if Necessary:
-
If the signal is weak or the channel is missing, fine-tune the dish’s azimuth and elevation while monitoring the signal meter.
-
Check LNB skew and cables for 70-98% signal strength.
-
-
Test the Broadcast:
-
Locate Algérie 3 in your channel list and select it to ensure clear playback.
-
If issues persist, recheck settings or consult a professional installer.
-
Receiver Tips:
-
For Strong receivers (e.g., SRT 4920), enable “LNB Power” in the “Signal Carrier” menu.
-
For Humax or Technisat, set LNB to “Universal” (9750/10600 MHz).
-
Default PINs (e.g., 0000, 1234) may be required; check your manual.
Algérie 3’s Diverse Programming
Algérie 3 offers a rich lineup of programs that cater to a wide audience, blending news, sports, and culture. Key highlights include:
Top Programs
-
Fi Dairat Ad-Daw (In the Spotlight): A political talk show hosted by Karim Bousalem, covering major Algerian and Arab events.
-
Hissat Niqash Maftouh (Open Discussion): A social program hosted by Fouzia Bousbak, addressing community issues.
-
Al-Majalla Al-Iqtisadiya (Economic Magazine): Economic news and analysis with Faiza Bachi.
-
Hiwar Shamal Janoub (North-South Dialogue): Engaging discussions hosted by Khaled Ben Salem.
-
Yawm fi Dhakirat Al-Jazair (A Day in Algeria’s Memory): Historical documentaries presented by Jaziya Bayou, exploring Algeria’s past.
Content divisions
-
News: Comprehensive coverage of political and economic developments in Algeria and the Arab world.
-
Sports: Live broadcasts and analysis of Algerian football matches, including African Cup of Nations and local leagues.
-
Entertainment: Algerian dramas and select Arab series, especially during Ramadan.
-
Cultural: Programs showcasing Algerian heritage, music, and history.
-
Social: Talk shows addressing societal concerns and solutions.
Knowing key technical details, such as symbol rates, polarization, and satellite positions, enables precise receiver tuning and prevents signal interruptions.
Step-by-step installation guidance makes setup simple for both novices and experienced users, reducing the chance of errors.
Keeping track of newly launched or updated channels ensures your receiver remains properly aligned for continuous broadcasts.
Troubleshooting advice helps quickly resolve weak signals, misalignment, or temporary reception problems.
Organized and current information saves time, letting viewers focus on enjoying their programs instead of searching for scattered data.
By combining precise frequency updates, practical setup instructions, and effective problem-solving techniques, smooth and reliable viewing becomes effortless.
Knowing key technical details, such as symbol rates, polarization, and satellite positions, enables precise receiver tuning and prevents signal interruptions.
Step-by-step installation guidance makes setup simple for both novices and experienced users, reducing the chance of errors.
Keeping track of newly launched or updated channels ensures your receiver remains properly aligned for continuous broadcasts.
Troubleshooting advice helps quickly resolve weak signals, misalignment, or temporary reception problems.
Organized and current information saves time, letting viewers focus on enjoying their programs instead of searching for scattered data.
By combining precise frequency updates, practical setup instructions, and effective problem-solving techniques, smooth and reliable viewing becomes effortless.
Understanding technical details such as transponder lists, symbol rates, polarization, and orbital positions enables precise tuning and optimal signal reception.
Step-by-step instructions guide viewers through installation and setup, making the process accessible for all skill levels and minimizing errors.
Monitoring newly launched channels or frequency changes ensures your receiver stays current and aligned, maintaining uninterrupted access.
Troubleshooting guidance addresses issues like weak signals, misalignment, and temporary interference, offering quick and effective solutions.
Proper maintenance of your dish and receiver contributes to consistent signal strength and reliable reception across all channels.
Organizing all frequency information and installation steps saves time and reduces frustration when setting up new channels.
Combining accurate data, clear instructions, and troubleshooting ensures smooth, high-quality broadcasts every time.
With these practices, viewers can confidently explore satellite channels across multiple satellites without worrying about disruptions.
The result is a seamless, enjoyable, and worry-free viewing experience for everyone.
