Shehab TV Satellite Frequencies and Tuning Guide 2025
Step-by-step setup instructions allow users to configure their receivers properly, avoiding interruptions when new or updated channels are added.
Technical information, including transponder lists, symbol rates, and polarization settings, helps viewers achieve stable and clear reception.
Troubleshooting tips address common issues such as weak signals, interference, or temporary outages, reducing disruptions during viewing.
With precise data and structured guidance, users can navigate the satellite environment with confidence and ease.
Combining these practices ensures a smooth, dependable, and enjoyable satellite viewing experience across all channels.
Comprehensive technical instructions, covering details such as symbol rates, polarization, and satellite positions, guarantee that channels are set up and tuned effectively.
Installation instructions presented in a clear, step-by-step format create the process simple for both beginners and experienced users, reducing the chance of errors.
Troubleshooting methods address common issues such as signal drops, misalignment, or weak reception, allowing quick restoration of quality broadcasts.
With accurate data, organized instructions, and practical solutions combined, you can enjoy seamless, high-quality viewing without wasting time searching for scattered information.
Comprehensive technical instructions, covering details such as symbol rates, polarization, and satellite positions, guarantee that channels are set up and tuned effectively.
Installation instructions presented in a clear, step-by-step format create the process simple for both beginners and experienced users, reducing the chance of errors.
Troubleshooting methods address common issues such as signal drops, misalignment, or weak reception, allowing quick restoration of quality broadcasts.
With accurate data, organized instructions, and practical solutions combined, you can enjoy seamless, high-quality viewing without wasting time searching for scattered information.
Within this guide, you’ll find the most recent frequency information for the featured channel across all compatible satellites, along with clear, step-by-step instructions to properly configure your receiver.
It also includes practical troubleshooting techniques to resolve common issues such as poor signal strength or disappearing channels.
By following these guidelines, you can ensure stable transmissions and enjoy a smooth, uninterrupted viewing experience.
Within this guide, you’ll find the most recent frequency information for the featured channel across all compatible satellites, along with clear, step-by-step instructions to properly configure your receiver.
It also includes practical troubleshooting techniques to resolve common issues such as poor signal strength or disappearing channels.
By following these guidelines, you can ensure stable transmissions and enjoy a smooth, uninterrupted viewing experience.
You will also discover helpful troubleshooting guidance to resolve any signal difficulties, guaranteeing smooth and continuous viewing at all times.
Shehab TV is an Iraqi children’s television channel launched in 2020, dedicated to providing entertaining and educational content for kids aged 3 to 12.
Based in Iraq, it offers a safe, family-friendly environment with programs focused on Islamic values, featuring animated series, religious anthems, and educational shows.
Trusted by parents across the Arab world, Shehab TV promotes moral and intellectual growth through engaging content like Return of Juha.
As a free-to-air channel, it broadcasts via major satellites and streams live on www.shehabtv.com and YouTube.
This guide provides the latest Shehab TV frequencies on satellites as of June 2025, a step-by-step receiver tuning process, tips for strong reception, and an overview of its captivating programs.
Why Watch Shehab TV?
-
Purposeful Content: Programs instill Islamic values and positive behaviors, such as Quran memorization and kindness.
-
Diverse Programming: From religious anthems to cartoons like Return of Juha, it caters to various age groups.
-
Free and Accessible: Available free-to-air on satellites and via live streaming on www.shehabtv.com and YouTube.
-
Parental Trust: Its safe, wholesome content creates it a top choice for families in Iraq and the Arab region.
-
High Quality: Broadcasts in HD and SD to suit different receivers, ensuring a clear viewing experience.
Shehab TV Satellite Frequencies
To tune into Shehab TV, you need accurate frequency, polarization, symbol rate, and FEC (Forward Error Correction) settings for your satellite receiver.
The table below lists the latest frequencies for Shehab TV on major satellites as of June 2025, sourced from reliable platforms like www.lyngsat.com and www.channelsdir.com.
As a free-to-air channel, no decryption is required. Always verify frequencies with these sources, as transponder settings may change.
|
Satellite |
Frequency |
Polarization |
Transmission Rate |
FEC |
Coverage |
Details |
|---|---|---|---|---|---|---|
|
Nilesat 201/Eutelsat 7 West A (7.0° W) |
11392 MHz |
Vertical (V) |
27500 kS/s |
7/8 |
Middle East, North Africa |
HD, DVB-S, strong signal in Iraq, Egypt, Saudi Arabia. Named Shehab TV HD. |
|
Nilesat 201/Eutelsat 7 West A (7.0° W) |
11373 MHz |
Horizontal (H) |
27500 kS/s |
5/6 |
Middle East, North Africa |
SD, DVB-S, suitable for older receivers. Named Shehab TV. |
|
Arabsat (Badr 4/8) (26.0° E) |
11938 MHz |
Vertical (V) |
27500 kS/s |
3/4 |
Middle East, North Africa |
SD, DVB-S, reliable in UAE, Qatar, Kuwait. Named Shehab TV. |
Key Details
-
Satellite Coverage: Shehab TV primarily broadcasts on Nilesat and Arabsat (Badr). No confirmed frequencies are available on Hot Bird (13.0° E), Yahsat (52.5° E), or Arabsat 5C (20.0° E) as of June 2025.
-
Frequency Accuracy: Avoid outdated frequencies like 11177 MHz on Nilesat, which may no longer be active. The table above provides the most reliable settings.
-
Global Access: Signals may weaken outside MENA (e.g., Asia or the Americas). Stream live on www.shehabtv.com or YouTube for worldwide access.
-
Free-to-Air Status: Shehab TV is unencrypted, requiring no subscription, ensuring accessibility within satellite footprints.
Tips for Strong Reception
To enjoy Shehab TV with clear, uninterrupted viewing, follow these practical tips for satellite reception:
-
Dish Size: Use a 60-80 cm dish for Nilesat and Arabsat in MENA (e.g., Baghdad, Cairo, Riyadh). In fringe regions (e.g., northern Europe), a 90-120 cm dish enhances signal strength.
-
Precise Dish Alignment: Point your dish to Nilesat (7.0° W) or Arabsat (26.0° E) using a satellite finder or apps like DishPointer or SatFinder. Ensure no obstructions (e.g., trees) block the signal.
-
LNB Selection: Install a Universal Ku-band LNB (9.75/10.6 GHz) compatible with DVB-S for Nilesat and Arabsat. Confirm DVB-S2 support for HD broadcasts.
-
Signal Strength: Aim for 70% or higher signal quality (98% is optimal) on your receiver’s signal meter to avoid pixelation. Adjust LNB skew for peak performance.
-
Weather Protection: Ku-band signals may weaken during heavy rain. Secure your dish and check LNB caps for water damage to maintain signal stability.
-
Coverage Check: Verify your location is within the satellite’s beam using coverage maps on www.dishpointer.com or www.satbeams.com.
Tuning Shehab TV on Your Receiver
Adding Shehab TV to your satellite receiver is quick and easy with these steps, compatible with most receivers (e.g., Strong, Humax, Starsat), though menu names may vary slightly.
-
Access the Menu:
-
Press “Menu” or “Settings” on your remote.
-
Navigate to “Installation,” “Channel Search,” or “Antenna Setup.”
-
-
Select Manual Scan:
-
Choose “Manual Scan,” “Manual Installation,” or “Add Signal Carrier.”
-
Select “Add TP” or “Edit Signal Carrier” if prompted.
-
-
Choose Your Satellite:
-
Select Nilesat (7.0° W) or Arabsat (Badr 4/8, 26.0° E) from the satellite list.
-
If not listed, manually enter the orbital position.
-
-
Enter Signal Carrier Settings:
-
Refer to the frequency table above and input the settings for your chosen satellite (e.g., 11392 MHz, Vertical, 27500 kS/s, 7/8 for Nilesat HD).
-
Double-check entries for accuracy.
-
-
Run the Scan:
-
Press “Scan,” “Search,” or “OK” to begin the scan.
-
Select “FTA Only” or “All Channels” to include free-to-air channels.
-
Wait 1-3 minutes for the scan to complete.
-
-
Save Channels:
-
Press “Save” or “OK” to store the scanned channels.
-
Shehab TV will appear as “Shehab TV” or “Shehab TV HD” in your channel list.
-
-
Fine-Tune for Strong Signal:
-
If the signal is weak or the channel is missing, adjust the dish’s azimuth and elevation while monitoring the signal meter.
-
Check LNB skew and cables for 70-98% signal strength.
-
-
Test the Broadcast:
-
Locate Shehab TV in your channel list and select it to confirm clear playback.
-
If issues persist, recheck settings or consult a professional installer.
-
Receiver Tips:
-
For Strong receivers (e.g., SRT 4950), enable “LNB Power” in the “Signal Carrier” menu.
-
For Humax or Starsat, set LNB to “Universal” for Ku-band.
-
Default PINs (e.g., 0000, 1234) may be required; refer to your manual.
Shehab TV’s Captivating Programming
Shehab TV offers a diverse lineup of programs that blend education and entertainment, with a focus on Islamic values. Key highlights include:
Top Programs
-
Friends of Shehab Messages: An interactive show featuring children’s letters and ideas, encouraging participation.
-
Surah Yasin Memorization Contest: A religious competition rewarding kids for Quran memorization.
-
Return of Juha: A humorous cartoon series with moral lessons, featuring Iraqi characters.
-
Educational Anthems: Islamic songs teaching letters, numbers, and values.
-
Kids’ Lessons: Simplified lessons promoting positive behaviors and personal growth.
Content divisions
-
Educational: Programs teaching Quran, ethics, and basic skills.
-
Entertainment: Anime and cartoons like Return of Juha for all ages.
-
Religious: Anthems and contests fostering Islamic awareness.
-
Interactive: Shows encouraging kids to share ideas and engage.
Prime-time (7 PM to 11 PM) features top shows, with reruns throughout the day. Content is also available via live streaming on www.shehabtv.com and YouTube.
Step-by-step tuning instructions help users configure their receivers correctly, preventing loss of access to newly launched or updated channels.
Technical details such as transponder lists, symbol rates, and polarization settings guide viewers in achieving stable and clear reception.
Troubleshooting strategies provide solutions for common issues like weak signals, interference, or temporary outages, minimizing disruptions to your viewing.
With accurate data and organized guidance, users can navigate the satellite landscape confidently and efficiently.
Combining these elements ensures a smooth, reliable, and enjoyable viewing experience across all satellites.
Understanding technical details such as transponder lists, symbol rates, polarization, and orbital positions enables precise tuning and optimal signal reception.
Step-by-step instructions guide viewers through installation and setup, making the process accessible for all skill levels and minimizing errors.
Monitoring newly launched channels or frequency changes ensures your receiver stays current and aligned, maintaining uninterrupted access.
Troubleshooting guidance addresses issues like weak signals, misalignment, and temporary interference, offering quick and effective solutions.
Proper maintenance of your dish and receiver contributes to consistent signal strength and reliable reception across all channels.
Organizing all frequency information and installation steps saves time and reduces frustration when setting up new channels.
Combining accurate data, clear instructions, and troubleshooting ensures smooth, high-quality broadcasts every time.
With these practices, viewers can confidently explore satellite channels across multiple satellites without worrying about disruptions.
The result is a seamless, enjoyable, and worry-free viewing experience for everyone.
Knowing technical details, including symbol rates and polarization, helps maximize signal strength and prevents channels from dropping.
Step-by-step setup instructions guide users through installation and tuning, making the process easy for both beginners and experienced viewers.
Regularly checking new channels or updates to broadcast parameters guarantees uninterrupted access at all times.
Troubleshooting tips provide quick fixes for weak signals, interference, or misalignment, resolving common reception issues efficiently.
Organizing and maintaining accurate frequency data saves time and reduces complications during receiver setup.
By combining reliable information, clear guidance, and practical troubleshooting, viewers can enjoy seamless and uninterrupted satellite viewing.
This comprehensive approach ensures every broadcast remains stable, accessible, and enjoyable across all satellites.




