This article provides the newest frequency updates for the highlighted channel across all major satellites, along with clear, step-by-step guidance for setting up your receiver.
It also outlines practical troubleshooting tips to resolve common problems like low signal strength or dish misalignment.
By following these instructions, you can enjoy stable broadcasts and a seamless satellite viewing experience every time.
In this guide, you’ll find the newest broadcast parameters for the featured channel available on various satellites.
Clear, step-by-step directions are provided to walk you through the receiver setup process, ensuring fast and effortless installation.
You’ll also benefit from practical troubleshooting advice to help resolve common problems such as signal drops or missing channels.
By using this guide, you can enjoy a smooth, consistent, and interruption-free satellite viewing experience.
You will also discover helpful troubleshooting guidance to resolve any signal difficulties, guaranteeing smooth and continuous viewing at all times.
In this article, we provide all the essential frequency information for the featured channel and guide you through the correct steps to install it on your receiver.
We’ve also included practical troubleshooting advice to help you resolve any reception issues and maintain smooth, uninterrupted viewing.
This article provides the newest frequency updates for the highlighted channel across all major satellites, along with clear, step-by-step guidance for setting up your receiver.
It also outlines practical troubleshooting tips to resolve common problems like low signal strength or dish misalignment.
By following these instructions, you can enjoy stable broadcasts and a seamless satellite viewing experience every time.
Comprehensive technical instructions, covering details such as symbol rates, polarization, and satellite positions, guarantee that channels are set up and tuned effectively.
Installation instructions presented in a clear, step-by-step format create the process simple for both beginners and experienced users, reducing the chance of errors.
Troubleshooting methods address common issues such as signal drops, misalignment, or weak reception, allowing quick restoration of quality broadcasts.
With accurate data, organized instructions, and practical solutions combined, you can enjoy seamless, high-quality viewing without wasting time searching for scattered information.
Abu Dhabi TV, part of Abu Dhabi Media, is a leading Emirati television channel launched in 1969, with its modern format established in 2000 and rebranded as Abu Dhabi Al Oula in 2008.
Broadcasting primarily in Arabic, it offers a diverse mix of news, dramas, talk shows, cultural programs, and documentaries, reflecting the UAE’s heritage and modern achievements.
Popular programs include Ana wa Binti and Min Wahi Al-Tasreeh, appealing to Arab families across the Middle East and beyond.
As a free-to-air channel, it is accessible via major satellites and streams live on www.adtv.ae and YouTube.
This guide provides the latest frequencies for Abu Dhabi TV on satellites as of June 2025, a step-by-step tuning process, reception tips, and an overview of its engaging content.
Why Watch Abu Dhabi TV?
-
Diverse Content: Offers news, dramas, cultural, and religious programs, catering to varied interests.
-
Free-to-Air Access: Available without subscription on satellites and online platforms.
-
High-Quality Broadcasts: Provides HD and SD options for clear, immersive viewing.
-
Cultural Focus: Showcases Emirati heritage and modern UAE developments, resonating with Arab audiences.
-
Global Reach: Broadcasts to the Middle East, North Africa, Europe, and beyond, with streaming for worldwide access.
Abu Dhabi TV Satellite Frequencies
To tune into Abu Dhabi TV, you need accurate frequency, polarization, symbol rate, and FEC (Forward Error Correction) settings for your satellite receiver.
|
Satellite |
Frequency |
Polarization |
Transmission Rate |
FEC |
Coverage |
Details |
|---|---|---|---|---|---|---|
|
Nilesat 201/Eutelsat 7 West A (7.0° W) |
11823 MHz |
Vertical (V) |
27500 kS/s |
5/6 |
Middle East, North Africa |
HD, DVB-S2, strong in UAE, Egypt, Saudi Arabia. Named Abu Dhabi TV HD. |
|
Arabsat (Badr 4/8) (26.0° E) |
11804 MHz |
Horizontal (H) |
27500 kS/s |
3/4 |
Middle East, North Africa |
SD, DVB-S, reliable in Qatar, Jordan, Kuwait. Named Abu Dhabi TV. |
|
Hot Bird 13B/C/D (13.0° E) |
11747 MHz |
Vertical (V) |
27500 kS/s |
3/4 |
Middle East, Europe |
SD, DVB-S, available in parts of Europe and MENA. Named Abu Dhabi TV. |
Key Details
-
Satellite Coverage: Abu Dhabi TV broadcasts on Nilesat, Arabsat (Badr), and Hot Bird, ensuring wide coverage across MENA and Europe. No confirmed frequencies are available on Yahsat (52.5° E) or Es’hail 2 (26.0° E) as of June 2025. Claims of Abu Dhabi TV on these satellites are outdated or confused with other channels.
-
Frequency Accuracy: Avoid obsolete frequencies like 12226 MHz (Horizontal) or 12467 MHz (Vertical) on Nilesat, which are no longer active for Abu Dhabi TV. The table above provides verified settings.
-
Global Access: Signals may weaken outside MENA (e.g., Asia or the Americas). Stream live on www.adtv.ae or YouTube for worldwide access.
-
Free-to-Air Status: Abu Dhabi TV is unencrypted, requiring no subscription, ensuring accessibility within satellite footprints.
Tips for Strong Reception
To enjoy Abu Dhabi TV with clear, uninterrupted viewing, follow these practical tips for optimal satellite reception:
-
Dish Size: Use a 60-80 cm dish for Nilesat and Arabsat in MENA (e.g., Abu Dhabi, Cairo, Riyadh).
-
For Hot Bird in Europe, a 70-100 cm dish is recommended. In fringe regions (e.g., northern Europe or Central Asia), a 90-120 cm dish enhances signal strength.
-
Precise Dish Alignment: Point your dish to Nilesat (7.0° W), Arabsat (26.0° E), or Hot Bird (13.0° E) using a satellite finder or apps like DishPointer or SatFinder. Ensure no obstructions block the signal.
-
LNB Selection: Install a Universal Ku-band LNB (9.75/10.6 GHz) compatible with DVB-S for Arabsat and Hot Bird, and DVB-S2 for Nilesat HD broadcasts. Confirm receiver compatibility.
-
Signal Strength: Aim for 70% or higher signal quality (98% is optimal) on your receiver’s signal meter to prevent pixelation. Adjust LNB skew for peak performance.
-
Weather Protection: Ku-band signals may weaken during heavy rain. Secure your dish and check LNB caps for water damage to maintain stability.
-
Coverage Check: Verify your location is within the satellite’s beam using coverage maps on www.dishpointer.com or www.satbeams.com.
Tuning Abu Dhabi TV on Your Receiver
Adding Abu Dhabi TV to your satellite receiver is straightforward with these steps, compatible with most receivers (e.g., Strong, Humax, Starsat), though menu labels may vary slightly.
-
Access the Menu:
-
Press “Menu” or “Settings” on your remote.
-
Navigate to “Installation,” “Channel Search,” or “Antenna Setup.”
-
-
Select Manual Scan:
-
Choose “Manual Scan,” “Manual Installation,” or “Add Signal Carrier.”
-
Select “Add TP” or “Edit Signal Carrier” if prompted.
-
-
Choose Your Satellite:
-
Select Nilesat (7.0° W), Arabsat (Badr 4/8, 26.0° E), or Hot Bird (13.0° E) from the satellite list.
-
If not listed, manually enter the orbital position.
-
-
Enter Signal Carrier Settings:
-
Refer to the frequency table above and input the settings for your chosen satellite (e.g., 11823 MHz, Vertical, 27500 kS/s, 5/6 for Nilesat).
-
Double-check entries for accuracy.
-
-
Run the Scan:
-
Press “Scan,” “Search,” or “OK” to begin the scan.
-
Select “FTA Only” or “All Channels” to include free-to-air channels.
-
Wait 1-3 minutes for the scan to complete.
-
-
Save Channels:
-
Press “Save” or “OK” to store the scanned channels.
-
Abu Dhabi TV will appear as “Abu Dhabi TV HD” or “Abu Dhabi TV” in your channel list.
-
-
Fine-Tune for Strong Signal:
-
If the signal is weak or the channel is missing, adjust the dish’s azimuth and elevation while monitoring the signal meter.
-
Check LNB skew and cables for 70-98% signal strength.
-
-
Test the Broadcast:
-
Locate Abu Dhabi TV in your channel list and select it to confirm clear playback.
-
If issues persist, recheck settings or consult a professional installer.
-
Receiver Tips:
-
For Strong receivers (e.g., SRT 4950), enable “LNB Power” in the “Signal Carrier” menu.
-
For Humax or Starsat, set LNB to “Universal” for Ku-band.
-
Default PINs (e.g., 0000, 1234) may be required; refer to your manual.
Abu Dhabi TV’s Engaging Programming
Abu Dhabi TV delivers a comprehensive lineup of programs, blending news, entertainment, and cultural content, appealing to Arab families. Key highlights include:
Top Programs
-
Ana wa Binti: A talk show hosted by Egyptian actor Sherif Mounir and his daughter, featuring celebrity interviews and family-oriented discussions.
-
Min Wahi Al-Tasreeh: A religious program presented by Sheikh Wassim Yousef, simplifying Quranic interpretations and Islamic rulings.
-
Yalla Social: A program exploring trending topics on social media, engaging younger audiences.
-
Min Rahiq Al-Iman: Hosted by Sheikh Wassim Yousef, it addresses Islamic misconceptions in a concise format.
-
Documentaries: Short films showcasing the UAE’s history, tourism, and cultural heritage.
Content divisions
-
News: Bulletins every three hours covering local, regional, and global events.
-
Dramas: Popular Gulf, Egyptian, and Syrian series, especially during Ramadan.
-
Talk Shows: Cultural, social, and political discussions with expert guests.
-
Cultural: Programs highlighting Emirati traditions and modern achievements.
-
Entertainment: Family-friendly shows and Arabic films.
Knowing key technical details, such as symbol rates, polarization, and satellite positions, enables precise receiver tuning and prevents signal interruptions.
Step-by-step installation guidance makes setup simple for both novices and experienced users, reducing the chance of errors.
Keeping track of newly launched or updated channels ensures your receiver remains properly aligned for continuous broadcasts.
Troubleshooting advice helps quickly resolve weak signals, misalignment, or temporary reception problems.
Organized and current information saves time, letting viewers focus on enjoying their programs instead of searching for scattered data.
By combining precise frequency updates, practical setup instructions, and effective problem-solving techniques, smooth and reliable viewing becomes effortless.
Knowing key technical details, such as symbol rates, polarization, and satellite positions, enables precise receiver tuning and prevents signal interruptions.
Step-by-step installation guidance makes setup simple for both novices and experienced users, reducing the chance of errors.
Keeping track of newly launched or updated channels ensures your receiver remains properly aligned for continuous broadcasts.
Troubleshooting advice helps quickly resolve weak signals, misalignment, or temporary reception problems.
Organized and current information saves time, letting viewers focus on enjoying their programs instead of searching for scattered data.
By combining precise frequency updates, practical setup instructions, and effective problem-solving techniques, smooth and reliable viewing becomes effortless.
Knowing technical details, including symbol rates and polarization, helps maximize signal strength and prevents channels from dropping.
Step-by-step setup instructions guide users through installation and tuning, making the process easy for both beginners and experienced viewers.
Regularly checking new channels or updates to broadcast parameters guarantees uninterrupted access at all times.
Troubleshooting tips provide quick fixes for weak signals, interference, or misalignment, resolving common reception issues efficiently.
Organizing and maintaining accurate frequency data saves time and reduces complications during receiver setup.
By combining reliable information, clear guidance, and practical troubleshooting, viewers can enjoy seamless and uninterrupted satellite viewing.
This comprehensive approach ensures every broadcast remains stable, accessible, and enjoyable across all satellites.
