You will also discover helpful troubleshooting guidance to resolve any signal difficulties, guaranteeing smooth and continuous viewing at all times.
Understanding key technical parameters, such as symbol rates, polarization, and orbital positions, allows for accurate tuning and optimal reception.
Step-by-step setup instructions create installation straightforward for both beginners and experienced users, while minimizing mistakes.
Regularly tracking channel updates and newly launched broadcasts keeps your receiver synchronized with all current frequencies.
Troubleshooting guidance provides quick solutions for common problems like weak signals, interference, or temporary disruptions.
Proper maintenance of your dish and receiver helps maintain stable signals, reducing the chances of interruptions during viewing.
Organizing frequency information and setup procedures makes managing your receiver easier, without wasting time searching for scattered data.
Following these detailed practices ensures smooth, consistent, and high-quality viewing across multiple satellites.
With all these factors combined, enjoying your favorite channels becomes simple, reliable, and stress-free.
Comprehensive technical instructions, covering details such as symbol rates, polarization, and satellite positions, guarantee that channels are set up and tuned effectively.
Installation instructions presented in a clear, step-by-step format create the process simple for both beginners and experienced users, reducing the chance of errors.
Troubleshooting methods address common issues such as signal drops, misalignment, or weak reception, allowing quick restoration of quality broadcasts.
With accurate data, organized instructions, and practical solutions combined, you can enjoy seamless, high-quality viewing without wasting time searching for scattered information.
Following clear, step-by-step instructions for setting up and configuring your receiver helps ensure channels are tuned accurately and signal quality stays strong, even for newly added or updated broadcasts.
Troubleshooting advice helps resolve common reception issues, such as weak signals or temporary interruptions, without requiring technical expertise.
By combining accurate data, practical installation tips, and problem-solving strategies, you can enjoy a smooth, seamless viewing experience across all satellites.
Comprehensive technical instructions, covering details such as symbol rates, polarization, and satellite positions, guarantee that channels are set up and tuned effectively.
Installation instructions presented in a clear, step-by-step format create the process simple for both beginners and experienced users, reducing the chance of errors.
Troubleshooting methods address common issues such as signal drops, misalignment, or weak reception, allowing quick restoration of quality broadcasts.
With accurate data, organized instructions, and practical solutions combined, you can enjoy seamless, high-quality viewing without wasting time searching for scattered information.
This article presents the latest parameters for the featured channel and offers simple, step-by-step guidance for setting up your receiver, as well as solutions for minor issues that could affect signal quality.
In this article, we provide all the essential frequency information for the featured channel and guide you through the correct steps to install it on your receiver.
We’ve also included practical troubleshooting advice to help you resolve any reception issues and maintain smooth, uninterrupted viewing.
This article presents the latest parameters for the featured channel and offers simple, step-by-step guidance for setting up your receiver, as well as solutions for minor issues that could affect signal quality.
Understanding key technical parameters, such as symbol rates, polarization, and orbital positions, allows for accurate tuning and optimal reception.
Step-by-step setup instructions create installation straightforward for both beginners and experienced users, while minimizing mistakes.
Regularly tracking channel updates and newly launched broadcasts keeps your receiver synchronized with all current frequencies.
Troubleshooting guidance provides quick solutions for common problems like weak signals, interference, or temporary disruptions.
Proper maintenance of your dish and receiver helps maintain stable signals, reducing the chances of interruptions during viewing.
Organizing frequency information and setup procedures makes managing your receiver easier, without wasting time searching for scattered data.
Following these detailed practices ensures smooth, consistent, and high-quality viewing across multiple satellites.
With all these factors combined, enjoying your favorite channels becomes simple, reliable, and stress-free.
Emirates TV, formerly known as Abu Dhabi Al Emarat, is a flagship channel operated by Abu Dhabi Media, launched to showcase the cultural, social, and economic vibrancy of the United Arab Emirates.
Broadcasting primarily in Arabic, it offers a diverse lineup of news, dramas, cultural programs, talk shows, and documentaries that reflect the UAE’s heritage and modern achievements.
Popular programs include Watan and Emirati Stories, which resonate with audiences across the Arab world by celebrating Emirati identity and values.
As a free-to-air channel, Emirates TV is accessible via major satellites and streams live on official platforms and mobile apps.
This guide provides the latest frequencies for Emirates TV on satellites as of June 2025, a step-by-step tuning process, reception tips, and an overview of its engaging programming.
Why Watch Emirates TV?
-
Cultural Focus: Highlights Emirati traditions, history, and modern developments, fostering national pride.
-
Diverse Content: Offers news, dramas, talk shows, and documentaries, appealing to a broad Arab audience.
-
Free-to-Air Access: Available without subscription on satellites and streaming platforms.
-
High-Quality Broadcasts: Provides HD and SD options for a clear, immersive viewing experience.
-
Regional Appeal: Connects with viewers in the Middle East, North Africa, and beyond, promoting UAE’s global influence.
Emirates TV Satellite Frequencies
To tune into Emirates TV, you need accurate frequency, polarization, symbol rate, and FEC (Forward Error Correction) settings for your satellite receiver.
The table below lists the latest frequencies for Emirates TV on key satellites as of June 2025, compiled from reliable satellite broadcasting data.
As a free-to-air channel, no decryption is required. Note that transponder settings may change, so periodic verification is recommended.
|
Satellite |
Frequency |
Polarization |
Transmission Rate |
FEC |
Coverage |
Details |
|---|---|---|---|---|---|---|
|
Nilesat 201/Eutelsat 7 West A (7.0° W) |
12226 MHz |
Vertical (V) |
27500 kS/s |
5/6 |
Middle East, North Africa |
HD, DVB-S2, strong in UAE, Egypt, Saudi Arabia. Named Emirates TV HD. |
|
Arabsat (Badr 4/8) (26.0° E) |
11804 MHz |
Horizontal (H) |
27500 kS/s |
3/4 |
Middle East, North Africa |
SD, DVB-S, reliable in Qatar, Jordan, Kuwait. Named Emirates TV. |
|
Hot Bird 13B/C/D (13.0° E) |
11747 MHz |
Vertical (V) |
27500 kS/s |
3/4 |
Middle East, Europe |
SD, DVB-S, available in parts of Europe and MENA. Named Emirates TV. |
Key Details
-
Satellite Coverage: Emirates TV broadcasts on Nilesat, Arabsat (Badr), and Hot Bird, ensuring accessibility across the Middle East, North Africa, and parts of Europe. No confirmed frequencies are available on Yahsat (52.5° E) or Es’hail 2 (26.0° E) as of June 2025.
-
Frequency Accuracy: Avoid outdated frequencies like 12467 MHz (Vertical) or 11823 MHz (Horizontal) on Nilesat, which may no longer be active for Emirates TV. The table above provides verified settings.
-
Global Access: Signals may weaken outside MENA (e.g., Asia or the Americas). Stream live on official Emirates TV platforms or mobile apps for worldwide access.
-
Free-to-Air Status: Emirates TV is unencrypted, requiring no subscription, ensuring accessibility within satellite footprints.
Tips for Strong Reception
To enjoy Emirates TV with clear, uninterrupted viewing, follow these practical tips for optimal satellite reception:
-
Dish Size: Use a 60-80 cm dish for Nilesat and Arabsat in MENA (e.g., Abu Dhabi, Cairo, Riyadh). For Hot Bird in Europe, a 70-100 cm dish is recommended. In fringe regions (e.g., northern Europe), a 90-120 cm dish enhances signal strength.
-
Precise Dish Alignment: Point your dish to Nilesat (7.0° W), Arabsat (26.0° E), or Hot Bird (13.0° E) using a satellite finder or mobile apps. Ensure no obstructions (e.g., trees, buildings) block the signal.
-
LNB Selection: Install a Universal Ku-band LNB (9.75/10.6 GHz) compatible with DVB-S for Arabsat and Hot Bird, and DVB-S2 for Nilesat HD broadcasts. Confirm receiver compatibility.
-
Signal Strength: Aim for 70% or higher signal quality (98% is optimal) on your receiver’s signal meter to prevent pixelation. Adjust LNB skew for peak performance.
-
Weather Protection: Ku-band signals may weaken during heavy rain. Secure your dish and check LNB caps for water damage to maintain stability.
-
Coverage Check: Confirm your location is within the satellite’s beam to ensure signal availability.
Tuning Emirates TV on Your Receiver
Adding Emirates TV to your satellite receiver is straightforward with these steps, compatible with most receivers (e.g., Strong, Humax, Starsat), though menu labels may vary slightly.
-
Access the Menu:
-
Press “Menu” or “Settings” on your remote.
-
Navigate to “Installation,” “Channel Search,” or “Antenna Setup.”
-
-
Select Manual Scan:
-
Choose “Manual Scan,” “Manual Installation,” or “Add Signal Carrier.”
-
Select “Add TP” or “Edit Signal Carrier” if prompted.
-
-
Choose Your Satellite:
-
Select Nilesat (7.0° W), Arabsat (Badr 4/8, 26.0° E), or Hot Bird (13.0° E) from the satellite list.
-
If not listed, manually enter the orbital position.
-
-
Enter Signal Carrier Settings:
-
Refer to the frequency table above and input the settings for your chosen satellite (e.g., 12226 MHz, Vertical, 27500 kS/s, 5/6 for Nilesat).
-
Double-check entries for accuracy.
-
-
Run the Scan:
-
Press “Scan,” “Search,” or “OK” to begin the scan.
-
Select “FTA Only” or “All Channels” to include free-to-air channels.
-
Wait 1-3 minutes for the scan to complete.
-
-
Save Channels:
-
Press “Save” or “OK” to store the scanned channels.
-
Emirates TV will appear as “Emirates TV HD” or “Emirates TV” in your channel list.
-
-
Fine-Tune for Strong Signal:
-
If the signal is weak or the channel is missing, adjust the dish’s azimuth and elevation while monitoring the signal meter.
-
Check LNB skew and cables for 70-98% signal strength.
-
-
Test the Broadcast:
-
Locate Emirates TV in your channel list and select it to confirm clear playback.
-
If issues persist, recheck settings or consult a professional installer.
-
Receiver Tips:
-
For Strong receivers (e.g., SRT 4950), enable “LNB Power” in the “Signal Carrier” menu.
-
For Humax or Starsat, set LNB to “Universal” for Ku-band.
-
Default PINs (e.g., 0000, 1234) may be required; refer to your manual.
Emirates TV’s Engaging Programming
Emirates TV offers a rich lineup of programs celebrating UAE culture, news, and entertainment, appealing to Arab audiences. Key highlights include:
Top Programs
-
Watan: A cultural program exploring Emirati traditions, history, and societal values.
-
Emirati Stories: Documentaries showcasing the UAE’s achievements and inspiring stories of its people.
-
Al-Akhbar: Daily news bulletins covering UAE, regional, and global events.
-
Talk Shows: Programs like Al-Majlis feature discussions on social, economic, and cultural topics with prominent guests.
-
Ramadan Specials: Religious and family-oriented content, including dramas and Islamic programs, during the holy month.
Content divisions
-
Cultural: Shows highlighting Emirati heritage, arts, and modern developments.
-
News: In-depth coverage of local and international events.
-
Dramas: Gulf and Arab series, popular during Ramadan and year-round.
-
Talk Shows: Engaging discussions on current affairs and societal issues.
-
Documentaries: Content exploring the UAE’s history, tourism, and innovation.
